Microabrasão de compósitos de matriz metálica a base de tungstênio empregados em coroas de perfuração utilizadas em sondagem mineral
Nenhuma Miniatura disponível
Data
2008-08-09
Autores
Lozzer, André Menegaz
Título da Revista
ISSN da Revista
Título de Volume
Editor
Universidade Federal do Espírito Santo
Resumo
It is important in rock core drilling for the diamond bit crown to be meticulously worn such that the cut is performed on the lithology. The objective of this work is to evaluate wear on composite matrix alloys used in perforation drill bits, produced from a tungsten powder skeleton held by an infiltrating metal alloy. Wear is evaluated through free ball micro-abrasion testing (Calowear), using abrasive slurry of Fe2O3, SiC, and SiO2. This work presents the relation between material hardness, tungsten mean size and composition of the metal powder, besides confronting acting micromechanisms in order to construct a specific wear map. Were also performed Vickers hardness, laser interferometry, and scanning electronic microscopic analysis of the wear mechanisms. It was found that composites hardness is not a determinant factor for wear resistance, as well as became evident the systemic character of the wear processes. Were found mechanisms of sliding, multiple indentation, besides the simultaneous, though dissociate, occurrence of both.
Descrição
Palavras-chave
Citação
LOZZER, André Menegaz. Microabrasão de compósitos de matriz metálica a base de tungstênio empregados em coroas de perfuração utilizadas em sondagem mineral. 2008. Dissertação (Mestrado em Engenharia mecânica) - Universidade Federal do Espírito Santo, Centro Tecnológico, Vitória, 2008.